Reversed phase is one of those subjects where the details matter more than the headlines. This page pulls together the background, the mechanisms, and the practical points readers ask about most.
Last reviewed on 2025-11-01. Where a claim depends on a specific study, the study is described rather than over-claimed.
Most routine HPLC testing uses reversed-phase columns, where the stationary phase is nonpolar and the mobile phase is a polar mixture such as water with an organic solvent. Analytes partition between the two phases according to polarity, size, and charge. Gradients that change solvent composition over time can separate compounds with broad retention ranges. Isocratic conditions keep solvent composition constant and suit simpler mixtures. The choice of column chemistry, pH, and temperature affects selectivity and peak shape.
Detection in HPLC testing commonly relies on ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. UV detection is widely used because many organic compounds absorb light, but it requires a chromophore. Mass spectrometry provides mass-based identification and high sensitivity for trace analytes. Each detector has trade-offs in selectivity, cost, and compatibility with mobile phases. Quantification typically uses calibration curves prepared from reference standards. Results are reported as concentration, purity, or presence above a limit.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample by passing them through a packed column under pressure. A pump delivers a mobile phase at a controlled flow rate, and an injector introduces the sample into the stream. Differences in how analytes partition between the mobile phase and the stationary phase cause them to exit the column at different times. Detection then records a signal proportional to the amount of each separated substance. The resulting chromatogram provides retention times and peak areas for identification and quantification.
Instrumentation includes a solvent delivery system, an autosampler, a column oven, and one or more detectors. Reversed-phase columns with chemically modified silica are widely used, but normal-phase, ion-exchange, size-exclusion, and affinity modes exist for specific separations. Detectors may rely on ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry. Column temperature, mobile phase composition, and flow rate are adjusted to improve resolution. System pressure is monitored because rising pressure can indicate column blockage or deteriorating packing.
| Property | Value | Notes |
|---|---|---|
| Separation mode | Reversed-phase | Nonpolar stationary phase with polar mobile phase |
| Typical column particle size | 3–5 µm | Smaller particles improve resolution but raise pressure |
| Typical flow rate | 0.5–2.0 mL/min | Depends on column dimensions and pressure limits |
| Common detection | UV-Vis absorbance | Requires analytes with chromophores |
| Typical run time | 5–30 min | Varies with method, gradient, and sample complexity |
High-performance liquid chromatography testing separates components of a liquid sample by forcing a mobile phase through a packed column. The stationary phase inside the column interacts with analytes to different degrees, so each compound exits at a characteristic retention time. A pump delivers solvent at controlled flow and pressure, while an injector introduces a precise sample volume. Detectors such as ultraviolet-visible, fluorescence, refractive index, or mass spectrometric instruments record the separated bands. The resulting chromatogram provides qualitative and quantitative information about the mixture.
Separation modes differ by the chemistry of the stationary phase and the composition of the mobile phase. Reversed-phase testing uses a nonpolar column and polar solvents, making it common for pharmaceutical, environmental, and food analytes. Normal-phase testing uses a polar column and nonpolar solvents for compounds that are poorly retained in reversed-phase systems. Ion-exchange and ion-pair methods separate charged species, while size-exclusion methods sort molecules by hydrodynamic volume. Gradient elution changes solvent strength over time to resolve complex mixtures, and isocratic elution holds solvent composition constant for simpler assays.
Key performance measures include retention time, peak area, peak height, resolution, tailing factor, and plate count. Retention time helps identify a peak under fixed conditions, but confirmation often requires a second method or detector. Peak area and height relate to concentration through calibration curves, which may be linear or nonlinear depending on the detector response. Resolution describes separation between adjacent peaks, while tailing factor and plate count describe peak shape and column efficiency. Performance checks verify these values before and during a run to confirm that the instrument is performing within limits.
Method validation establishes that an HPLC procedure is suitable for its intended use. Key parameters include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Accuracy measures agreement with a true or accepted value, while precision describes repeatability and intermediate precision. Specificity confirms that the method measures the analyte without interference from impurities, degradants, or excipients. Validation is documented in a protocol and report, and acceptance criteria are set before experiments begin. Regulatory guidance varies by region, but the general principles are widely harmonized.
System suitability testing is performed before and during analytical runs to confirm that the instrument and method are working as expected. Common checks include retention time, peak area, resolution between critical pairs, tailing factor, and theoretical plate count. Results are compared with predefined limits, and a failed check requires investigation before sample results are reported. Quality control samples at low, middle, and high concentrations are injected at intervals to monitor accuracy and precision. Blank injections detect carryover and contamination, while control charts track performance over time.
Developing an HPLC method begins with defining the purpose, such as quantifying a main component, measuring impurities, or confirming identity. Analysts select separation mode, column, mobile phase, detection, and sample preparation based on analyte properties and matrix. Experiments vary solvent strength, pH, buffer type, and temperature to achieve resolution between critical peaks. The goal is a robust method that produces reliable results across instruments and operators. Method development often involves trial runs and statistical optimization.
Validation demonstrates that a method is suitable for its intended use. Typical performance characteristics include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Regulators and standards organizations provide frameworks, but specific requirements depend on the application and jurisdiction. System suitability tests are run before sample analysis to confirm resolution, peak symmetry, retention time repeatability, and sensitivity. A validated method is not permanently fixed; changes may require partial or full revalidation.
United States civil aviation incidents are investigated by the National Transportation Safety Board (NTSB). NTSB officials piece together evidence from the crash site to determine likely cause, or causes. The NTSB also investigates overseas incidents involving US-registered aircraft, in collaboration with local investigative authorities, especially when significant loss of American lives occurs, or when the involved aircraft is American-built. In Venezuela, the organization tasked with investigating aviation accidents is the Ministry of Aquatic and Air Transport, more specifically the Directorate General for the Prevention and Investigation of Aeronautical Accidents.
The next generation of SNP annotation webservers can take advantage of the growing amount of data in core bioinformatics resources and use intelligent agents to fetch data from different sources as needed. From a user's point of view, it is more efficient to submit a set of SNPs and receive results in a single step, which makes meta-servers the most attractive choice. However, if SNP annotation tools deliver heterogeneous data covering sequence, structure, regulation, pathways, etc., they must also provide frameworks for integrating data into a decision algorithms, and quantitative confidence measures so users can assess which data are relevant and which are not.
Clinical assessment can be used to assess the function of the kidneys. This is because a person with abnormally functioning kidneys may have symptoms that develop. For example, a person with chronic kidney disease may develop oedema due to failure of the kidneys to regulate water balance. They may develop evidence of chronic kidney disease, that can be used to assess its severity, for example high blood pressure, osteoporosis or anaemia. If the kidneys are unable to excrete urea, a person may develop a widespread itch or confusion. Part of the assessment of kidney function includes the measurement of urine and its contents. Abnormal kidney function may cause too much or too little urine to be produced. The ability of the kidneys to filter protein is often measured, as urine albumin or urine protein levels, measured either at a single instance or, because of variation throughout the day, as 24-hour urine tests.
Sources: en.wikipedia.org
Schering AG filed for a patent for NETA in June 1957, and the patent was issued in December 1960. The drug was first marketed, by Parke-Davis as Norlestrin in the United States, in March 1964. This was a combination formulation of 2.5 mg NETA and 50 μg ethinylestradiol and was indicated as an oral contraceptive. Other early brand names of NETA used in oral contraceptives included Minovlar and Anovlar. Norethisterone acetate is the INNTooltip International Nonproprietary Name, BANMTooltip British Approved Name, and JANTooltip Japanese Accepted Name of NETA while norethindrone acetate is its USANTooltip United States Adopted Name and USPTooltip United States Pharmacopeia. NETA is marketed under a variety of brand names throughout the world including Primolut-Nor (major), Aygestin (USTooltip United States), Gestakadin, Milligynon, Monogest, Norlutate (USTooltip United States, CATooltip Canada), Primolut N, SH-420 (UKTooltip United Kingdom), Sovel, and Styptin among others.
An analgesic, also called an antalgic, painkiller, or pain reliever, is any member of the group of drugs used for pain management. Analgesics are conceptually distinct from anesthetics, which temporarily reduce, and in some instances eliminate, sensation, although analgesia and anesthesia are neurophysiologically overlapping and thus various drugs have both analgesic and anesthetic effects. Analgesic choice is also determined by the type of pain: For neuropathic pain, recent research has suggested that classes of drugs that are not normally considered analgesics, such as tricyclic antidepressants and anticonvulsants may be considered as an alternative. Various analgesics, such as many NSAIDs, are available over the counter in most countries, whereas various others are prescription drugs owing to the substantial risks and high chances of overdose, misuse, and addiction in the absence of medical supervision.
The use of high-resolution ion-mobility mass spectrometry (IMS-MS) on HPLC-purified alpha-synuclein in vitro has shown alpha-synuclein to be autoproteolytic (self-proteolytic), generating a variety of small molecular weight fragments upon incubation. The 14.46 kDa protein was found to generate numerous smaller fragments, including 12.16 kDa (amino acids 14–133) and 10.44 kDa (40–140) fragments formed through C- and N-terminal truncation and a 7.27 kDa C-terminal fragment (72–140). The 7.27 kDa fragment, which contains the majority of the NAC region, aggregated considerably faster than full-length alpha-synuclein. It is possible that these autoproteolytic products play a role as intermediates or cofactors in the aggregation of alpha-synuclein in vivo.
Sources: en.wikipedia.org
Caffeine consumption during pregnancy is associated with increased risk of pregnancy loss and increased risk of low birth weight, defined as below 2500 grams (5.5 pounds). The European Food Safety Authority and the American Congress of Obstetricians and Gynecologists concur that habitual caffeine consumption up to 200 mg per day by pregnant women does not give rise to safety concerns for the fetus. The United Kingdom Food Standards Agency had recommended that pregnant women should limit their caffeine intake to less than 300 mg of caffeine a day, but in 2009 revised that downward to less than 200 mg of caffeine a day. High doses of caffeine intake during pregnancy may increase the risk of miscarriage and some major negative pregnancy outcomes, such as stillbirth or low birth weight. A 2020 review called into question the safe levels proposed by the European Food Safety Authority, the American Congress of Obstetricians and Gynecologists, the National Health Service, and the Dietary Guidelines for Americans. It found that the current scientific evidence does not support moderate caffeine consumption during pregnancy as safe, and advised pregnant women and women contemplating pregnancy to avoid caffeine.
RNA sequencing (RNA-seq) RNA-seq is a high-throughput RNA sequencing technology that allows scientists to profile the entire RNA (transcriptome). Therefore, novel transcripts and gene expression level can be identified based on cDNA libraries. This method can be used for cancer diagnosis and treatment evaluation. Reverse transcription polymerase chain reaction (RT-PCR) RT-PCR is a widely used mRNA expression detection method. It enables reverse transcription of mRNA to cDNA for further identification and qualification. In early 1992, RT-PCR was applied in PSA gene expression in peripheral blood for early prostate cancer diagnosis. Digital PCR (dPCR) dPCR is a relatively accurate quantification method of measuring the initial concentration of mRNA targets. It can be applied to analyze genetic and epigenetic changes. In-situ hybridization (ISH) ISH is a tissue dependent visualization method of identifying mRNA targeted in the samples. The "tissue" can be blood sample. In chronic myeloid leukemia, ISH has been applied on peripheral-blood specimens.
The museum is located in a small two-storey building where laboratory of physics (on the first floor) and chemical laboratory (on the second floor) was designed. It was the first chemical laboratory of Kazan University. The first professor was N.N. Zinin, who studied abroad and learned new method of teaching chemistry and began to apply it in Kazan University. This method combined practical and lecture classes that is still familiar to students. There are no usual stalls and stands in the museum. It is a memorial laboratory of the 19th century which includes Butlerov's lecture room, a library, the laboratory itself, a hall for exhibiting chemical preparations and laboratory equipment of 19–20th centuries, and the study of the head of the laboratory (Butlerov's study). Nowadays in the main hall of the museum lectures and seminars and defence of master's and doctoral theses are conducted. In the side rooms you may observe modern laboratories.
Sources: en.wikipedia.org
It separates components in a liquid sample and measures their amounts using a detector. Results can indicate concentration, purity, or identity based on retention time and detector response. The technique works for mixtures that can be dissolved and filtered.
It offers high resolution, reproducibility, and compatibility with many sample types. A single run can separate and quantify multiple analytes. It is common in pharmaceutical, food, environmental, and industrial laboratories.
Samples must be soluble in a suitable mobile phase and free of particles that can block the column. Detector response depends on analyte structure, so some compounds need derivatization or alternative detection. Complex matrices may require extensive sample preparation.
HPLC separates and detects individual compounds in a liquid sample, producing peaks at characteristic retention times. Peak area or height can be used to estimate concentration when calibrated with known standards. It does not identify unknown compounds with certainty unless additional detectors or reference materials are used.